{"id":418,"date":"2020-04-06T14:00:08","date_gmt":"2020-04-06T12:00:08","guid":{"rendered":"http:\/\/tech.sosthe.sk\/?page_id=418"},"modified":"2020-04-06T14:00:08","modified_gmt":"2020-04-06T12:00:08","slug":"prikazy-cisco-ios","status":"publish","type":"page","link":"http:\/\/tech.sosthe.sk\/index.php\/ccna\/prikazy-cisco-ios\/","title":{"rendered":"Pr\u00edkazy Cisco IOS"},"content":{"rendered":"
Cisco IOS<\/b> (p\u00f4vodne Internetwork Operating System) je opera\u010dn\u00fd syst\u00e9m pou\u017e\u00edvan\u00fd na smerova\u010doch a prep\u00edna\u010doch firmy Cisco Systems.<\/span><\/h5>\n
\n
\n
\n
\n
\n

obsah<\/span><\/h2>\n

    \n
  • 1 <\/span><\/span>Preh\u013ead m\u00f3dov<\/span><\/span>\n
      \n
    • 1.1 <\/span><\/span>Kl\u00e1vesov\u00e9 skratky<\/span><\/span><\/li>\n
    • 1.2 <\/span><\/span>U\u017e\u00edvate\u013esk\u00fd m\u00f3d (User Mode)<\/span><\/span><\/li>\n
    • 1.3 <\/span><\/span>Privilegovan\u00fd m\u00f3d (Privileged Mode)<\/span><\/span><\/li>\n
    • 1.4 <\/span><\/span>Konfigura\u010dn\u00fd m\u00f3d (Configuration Mode)<\/span><\/span><\/li>\n
    • 1.5 <\/span><\/span>Konfigur\u00e1cia rozhrania (Interface Mode)<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n
    • 2 <\/span><\/span>Konfigur\u00e1cia routeru<\/span><\/span>\n
        \n
      • 2.1 <\/span><\/span>Pr\u00edstup cez SSH<\/span><\/span><\/li>\n
      • 2.2 <\/span><\/span>CDP<\/span><\/span><\/li>\n
      • 2.3 <\/span><\/span>ACL<\/span><\/span><\/li>\n
      • 2.4 <\/span><\/span>Statick\u00e9 smerovanie<\/span><\/span><\/li>\n
      • 2.5 <\/span><\/span>RIP smerovania<\/span><\/span><\/li>\n
      • 2.6 <\/span><\/span>IGRP smerovanie<\/span><\/span><\/li>\n
      • 2.7 <\/span><\/span>OSPF smerovanie<\/span><\/span><\/li>\n
      • 2.8 <\/span><\/span>EIGRP smerovania<\/span><\/span><\/li>\n
      • 2.9 <\/span><\/span>NAT \/ PAT<\/span><\/span><\/li>\n
      • 2.10 <\/span><\/span>DHCP<\/span><\/span><\/li>\n
      • 2.11 <\/span><\/span>PPP<\/span><\/span><\/li>\n
      • 2.12 <\/span><\/span>ISDN<\/span><\/span><\/li>\n
      • 2.13 <\/span><\/span>Frame-Relay<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n
      • 3 <\/span><\/span>Konfigur\u00e1cia switche<\/span><\/span>\n
          \n
        • 3.1 <\/span><\/span>Layer 3 pr\u00edstup<\/span><\/span><\/li>\n
        • 3.2 <\/span><\/span>STP<\/span><\/span><\/li>\n
        • 3.3 <\/span><\/span>Spr\u00e1va tabu\u013eky MAC adries<\/span><\/span><\/li>\n
        • 3.4 <\/span><\/span>VLAN<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

           <\/p>\n<\/div>\n

          <\/span>Preh\u013ead m\u00f3dov<\/span><\/span><\/h2>\n

          Z\u00e1kladn\u00e9 m\u00f3dy a pr\u00edkazy, ktor\u00fdmi mo\u017eno medzi t\u00fdmito m\u00f3dy prech\u00e1dza\u0165:<\/span><\/p>\n

          \n
          \"\"<\/div>\n<\/div>\n

          <\/span>Kl\u00e1vesov\u00e9 skratky\u00a0<\/span><\/span><\/h3>\n
            \n
          • \u0160\u00edpka hore (\u00a0<\/span>\u2191<\/span><\/b>\u00a0) alebo\u00a0<\/span>Ctrl + P<\/span><\/b>\u00a0– zobraz\u00ed predch\u00e1dzaj\u00faci pr\u00edkaz<\/span><\/li>\n
          • \u0160\u00edpka nadol (\u00a0<\/span>\u2193<\/span><\/b>\u00a0) alebo\u00a0<\/span>Ctrl + N<\/span><\/b>\u00a0– zobraz\u00ed nasleduj\u00faci pr\u00edkaz<\/span><\/li>\n
          • \u0160\u00edpka doprava (\u00a0<\/span>\u2192<\/span><\/b>\u00a0) alebo\u00a0<\/span>Ctrl + F<\/span><\/b>\u00a0– posun o jeden znak dopredu<\/span><\/li>\n
          • \u0160\u00edpka do\u013eava (\u00a0<\/span>\u2190<\/span><\/b>\u00a0) alebo\u00a0<\/span>Ctrl + B<\/span><\/b>\u00a0– posun o jeden znak sp\u00e4\u0165<\/span><\/li>\n
          • Tab<\/span><\/b>\u00a0– automatick\u00e9 doplnenie pr\u00edkazu<\/span><\/li>\n
          • ?\u00a0<\/span><\/b>– zobraz\u00ed ponuku dostupn\u00fdch pr\u00edkazov (pod\u013ea doteraz nap\u00edsan\u00fdch znakov)<\/span><\/li>\n<\/ul>\n

            <\/span>U\u017e\u00edvate\u013esk\u00fd m\u00f3d (User Mode)<\/span><\/span><\/h3>\n

            M\u00f3d, v ktorom sa nach\u00e1dzate po vytvorenie rel\u00e1cie s routerom \/ switchom.\u00a0Neumo\u017e\u0148uje meni\u0165 konfigur\u00e1ciu.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            enable<\/span><\/pre>\n<\/td>\n
            		Vstup do privilegovan\u00e9ho m\u00f3du<\/span><\/td>\n<\/tr>\n
            \n
            ping [...]<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz PING zis\u0165uje dostupnos\u0165 ciele pomocou protokolu ICMP.<\/span><\/td>\n<\/tr>\n
            \n
            traceroute [...]<\/span><\/pre>\n<\/td>\n
            		Trasovanie cesty k cie\u013eu pomocou protokolu ICMP.<\/span><\/td>\n<\/tr>\n
            \n
            exit<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz ukon\u010d\u00ed rel\u00e1ciu.<\/span><\/td>\n<\/tr>\n
            \n
            logout<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz ukon\u010d\u00ed rel\u00e1ciu.<\/span><\/td>\n<\/tr>\n
            \n
            show<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobraz\u00ed najr\u00f4znej\u0161ie inform\u00e1cie.<\/span><\/td>\n<\/tr>\n
            \n
            show flash<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobraz\u00ed inform\u00e1cia o vn\u00fatornej pam\u00e4te FLASH.<\/span><\/td>\n<\/tr>\n
            \n
            show ip interface [...]<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobrazia inform\u00e1cie o fyzick\u00fdch rozhraniach (napr.\u00a0<\/span>Serial1\/0<\/code>), Na ktor\u00fdch je nakonfigurovan\u00fd IP.<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobraz\u00ed routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            show version<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobrazia inform\u00e1cie o hardv\u00e9ri, IOS, rozhraniach, pam\u00e4te a konfigura\u010dn\u00fdm registra.<\/span><\/td>\n<\/tr>\n
            \n
            show clock<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobraz\u00ed nastaven\u00fd d\u00e1tum a \u010das.<\/span><\/td>\n<\/tr>\n
            \n
            show history<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobraz\u00ed zoznam naposledy pou\u017eit\u00fdch pr\u00edkazov.<\/span><\/td>\n<\/tr>\n
            \n
            show interfaces [...]<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz zobrazuje v\u0161etky inform\u00e1cie o rozhraniach.<\/span><\/td>\n<\/tr>\n
            \n
            telnet [...]<\/span><\/pre>\n<\/td>\n
            		Telnet klient (pre pripojenie k vzdialen\u00fdm syst\u00e9mom).<\/span><\/td>\n<\/tr>\n
            \n
            disconnect ...<\/span><\/pre>\n<\/td>\n
            		Odpoj\u00ed naviazan\u00fa rel\u00e1ciu.<\/span><\/td>\n<\/tr>\n
            \n
            show sessions<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed zoznam naviazan\u00fdch spojenie.<\/span><\/p>\n
              \n
            • Ctrl + Shift + 6<\/span><\/b>\u00a0, potom\u00a0<\/span>x<\/span><\/b>\u00a0– „usp\u00ed“ akt\u00edvne rel\u00e1cii<\/span><\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
            \n
            terminal history [...]<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz nastav\u00ed ve\u013ekos\u0165 buffera pre uchov\u00e1vanie zadan\u00fdch pr\u00edkazov.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            <\/span>Privilegovan\u00fd m\u00f3d (Privileged Mode)<\/span><\/span><\/h3>\n

            M\u00f3d, v ktorom je mo\u017en\u00e9 vykon\u00e1va\u0165 zmenu konfigur\u00e1cie.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            disable<\/span><\/pre>\n<\/td>\n
            		Sp\u00f4sob\u00ed n\u00e1vrat do pou\u017e\u00edvate\u013esk\u00e9ho m\u00f3du (User Mode).<\/span><\/td>\n<\/tr>\n
            \n
            setup<\/span><\/pre>\n<\/td>\n
            		Spust\u00ed konfigura\u010dn\u00fa utilitu (postupne sa formou jednoduch\u00fdch ot\u00e1zok sp\u00fdta na z\u00e1kladn\u00fa konfigur\u00e1ciu).<\/span><\/td>\n<\/tr>\n
            \n
            clock set [...]<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz nastav\u00ed \u010das.<\/span><\/td>\n<\/tr>\n
            \n
            debug ...<\/span><\/pre>\n<\/td>\n
            		Zapne r\u00f4zne ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip rip<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy pre routovacia protokol RIP.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip IGRP ...<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy pre routovacia protokol IGRP.<\/span><\/td>\n<\/tr>\n
            \n
            debug all<\/span><\/pre>\n<\/td>\n
            		Zapne v\u0161etky ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n
            \n
            debug ppp negotiation<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy pre overovanie v protokole PPP.<\/span><\/td>\n<\/tr>\n
            \n
            clear ...<\/span><\/pre>\n<\/td>\n
            		Funkcie na resetovanie.<\/span><\/td>\n<\/tr>\n
            \n
            clear arp-cache<\/span><\/pre>\n<\/td>\n
            		Vyma\u017ee ARP cache (tabu\u013eka obsahuj\u00faca k IP adres\u00e1m ich MAC adresy).<\/span><\/td>\n<\/tr>\n
            \n
            clear ip route *<\/span><\/pre>\n<\/td>\n
            		Vyma\u017ee routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            config<\/span><\/pre>\n<\/td>\n
            		\n
            configure terminal<\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigura\u010dn\u00e9ho m\u00f3du.<\/span><\/td>\n<\/tr>\n
            \n
            copy running-config tftp<\/span><\/pre>\n<\/td>\n
            		Skop\u00edruje s\u00fa\u010dasn\u00fa konfigur\u00e1ciu na TFTP server (s\u00fabor).<\/span><\/td>\n<\/tr>\n
            \n
            reload<\/span><\/pre>\n<\/td>\n
            		Re\u0161tartuje IOS.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            <\/span>Konfigura\u010dn\u00fd m\u00f3d (Configuration Mode)<\/span><\/span><\/h3>\n

            Hlb\u0161ie konfigur\u00e1cie routeru \/ switcha.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            end<\/span><\/pre>\n
            alebo kl\u00e1vesov\u00e1 skratka\u00a0<\/span>Ctrl + Z<\/span><\/b><\/td>\n
            		n\u00e1vrat do privilegovan\u00e9ho m\u00f3du<\/span><\/td>\n<\/tr>\n
            \n
            hostname ...<\/span><\/pre>\n<\/td>\n
            		Pr\u00edkaz nastav\u00ed meno zariadenia (routeru \/ switche).<\/span><\/td>\n<\/tr>\n
            \n
            line ...<\/span><\/pre>\n<\/td>\n
            		Nastavuje sp\u00f4sob prihlasovania ku konzole a virtu\u00e1lnym termin\u00e1lom.<\/span><\/td>\n<\/tr>\n
            \n
            line console 0<\/span><\/pre>\n
            password <heslo><\/span><\/pre>\n
            login<\/span><\/pre>\n<\/td>\n
            		Konfiguruje konzolu (potrebn\u00e9 zada\u0165 heslo).<\/span><\/td>\n<\/tr>\n
            \n
            line vty 0 4<\/span><\/pre>\n
            password <heslo><\/span><\/pre>\n
            login<\/span><\/pre>\n<\/td>\n
            		Konfiguruje virtu\u00e1lne termin\u00e1ly 0 – 4 (potrebn\u00e9 zada\u0165 heslo).<\/span><\/td>\n<\/tr>\n
            \n
            enable password <heslo><\/span><\/pre>\n<\/td>\n
            		Zapne potrebu zadanie hesla pri prechode do konfigura\u010dn\u00e9ho m\u00f3du.<\/span><\/td>\n<\/tr>\n
            \n
            enable secret <heslo><\/span><\/pre>\n<\/td>\n
            		Heslo na prechod do konfigura\u010dn\u00e9ho m\u00f3du (bude ulo\u017een\u00e9 za\u0161ifrovan\u00e9).<\/span><\/td>\n<\/tr>\n
            \n
            interface <typ> [<slot> \/] <port><\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigur\u00e1cie rozhrania.<\/span><\/td>\n<\/tr>\n
            \n
            banner motd <znak><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed popis routeru ukon\u010den\u00fd dan\u00fdm znakom.<\/span><\/td>\n<\/tr>\n
            \n
            ip ...<\/span><\/pre>\n<\/td>\n
            		Konfiguruje IP protokol.<\/span><\/td>\n<\/tr>\n
            \n
            ip hos\u0165 <meno> <adresy><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 IP adresy pod meno dan\u00e9ho zariadenia.<\/span><\/td>\n<\/tr>\n
            \n
            boot system ...<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed, z ktor\u00e9ho umiestnenie sa m\u00e1 pri \u0161tarte natiahnu\u0165 IOS.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            <\/span>Konfigur\u00e1cia rozhrania (Interface Mode)<\/span><\/span><\/h3>\n

            Pr\u00edkazy spolo\u010dn\u00e9 nastavovanie r\u00f4znych rozhran\u00ed.<\/span><\/p>\n\n\n\n\n\n\n\n
            \n
            ip ...<\/span><\/pre>\n<\/td>\n
            		Nastavuje protokol IP.<\/span><\/td>\n<\/tr>\n
            \n
            ip address <adresa> <maska><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed na danom rozhran\u00ed dan\u00fa IP adresu.<\/span><\/td>\n<\/tr>\n
            \n
            shutdown<\/span><\/pre>\n<\/td>\n
            		Vypne rozhranie.<\/span><\/td>\n<\/tr>\n
            \n
            no shutdown<\/span><\/pre>\n<\/td>\n
            		Zapne rozhranie.<\/span><\/td>\n<\/tr>\n
            \n
            description <popis><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed popis dan\u00e9ho rozhrania.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            Konfigur\u00e1cia routeru<\/span><\/span><\/h2>\n

            Tieto pr\u00edkazy funguj\u00fa len na smerova\u010doch (nie na prep\u00edna\u010doch).<\/span><\/p>\n

            <\/span>Pr\u00edstup cez SSH<\/span><\/span><\/h3>\n

            Postup pri konfigur\u00e1cii pr\u00edstupu cez SSH<\/span><\/p>\n\n\n\n\n\n\n\n
            \n
            hostname <meno><\/span><\/pre>\n<\/td>\n
            		Konfigur\u00e1cia men\u00e1 routeru.<\/span><\/td>\n<\/tr>\n
            \n
            ip domain-name <domena.com><\/span><\/pre>\n<\/td>\n
            		Konfigur\u00e1cia n\u00e1zvu dom\u00e9ny.<\/span><\/td>\n<\/tr>\n
            \n
            crypto key Generate rsa<\/span><\/pre>\n<\/td>\n
            		Vygenerovan\u00fd rsa k\u013e\u00fa\u010de.<\/span><\/td>\n<\/tr>\n
            \n
            username <MENO_POU\u017d\u00cdVATE\u013dA> secret <heslo><\/span><\/pre>\n<\/td>\n
            		Vytvorenie pou\u017e\u00edvate\u013ea s heslom<\/span><\/td>\n<\/tr>\n
            \n
            line vty 0 4<\/span><\/pre>\n
            transport input ssh<\/span><\/pre>\n
            login local<\/span><\/pre>\n<\/td>\n
            		Vytvorenie virtu\u00e1lnych termin\u00e1lov 0 – 4 s pr\u00edstupom cez ssh a pre prihlasovanie sa pou\u017eije lok\u00e1lne pou\u017e\u00edvate\u013e s heslom<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            CDP\u00a0<\/span><\/span><\/h3>\n

            Pr\u00e1ca s Cisco Discovery Protocol.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            cdp run<\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de – zapne CDP na v\u0161etk\u00fdch rozhraniach.<\/span><\/td>\n<\/tr>\n
            \n
            cdp enable<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhranie – zapne CDP na danom rozhran\u00ed.<\/span><\/td>\n<\/tr>\n
            \n
            show cdp<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o CDP.<\/span><\/td>\n<\/tr>\n
            \n
            show cdp entry ...<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o danom susedovi.<\/span><\/td>\n<\/tr>\n
            \n
            show cdp interface<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o rozhraniach, na ktor\u00fdch be\u017e\u00ed CDP.<\/span><\/td>\n<\/tr>\n
            \n
            show cdp Neighbors<\/span><\/pre>\n<\/td>\n
            		V privilegovanom m\u00f3de – zobraz\u00ed susedov.<\/span><\/td>\n<\/tr>\n
            \n
            clear cdp table<\/span><\/pre>\n<\/td>\n
            		Zma\u017ee tabu\u013eku susedov.<\/span><\/td>\n<\/tr>\n
            \n
            clear cdp counters<\/span><\/pre>\n<\/td>\n
            		Resetuje po\u010d\u00edtadl\u00e1 prenosov d\u00e1t.<\/span><\/td>\n<\/tr>\n
            \n
            show cdp traffic<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed mno\u017estvo prenesen\u00fdch d\u00e1t medzi susedmi.<\/span><\/td>\n<\/tr>\n
            \n
            debug cdp ...<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy CDP.<\/span><\/td>\n<\/tr>\n
            \n
            cdp timer<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed interval zasielanie CDP updatov.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            ACL<\/span><\/span><\/h3>\n

            Pr\u00e1ca s ACL (Access Control List).<\/span><\/p>\n\n\n\n
            \n
            access-list <\u010d\u00edslo typu protokolu> {deny | permit} <adresa> <wildchar maska><\/span><\/pre>\n
            V konfigura\u010dnom m\u00f3de prid\u00e1 pravidlo do zoznamu s dan\u00fdm \u010d\u00edslom (pre IP 1-99).<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n
            \n
            ip access-group <\u010d\u00edslo acl> ...<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhran\u00ed aplikuje ACL (i pomenovan\u00fd) na dan\u00fd traffic (in \/ out).<\/span><\/td>\n<\/tr>\n
            \n
            show access-lists<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed zoznam ACL.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
            \n
            access-list <\u010d\u00edslo typu protokolu> {deny | permit} <protokol> <adresa> <wildchar maska> ...<\/span><\/pre>\n
            Roz\u0161\u00edren\u00e9 IP ACL (s \u010d\u00edslami 100 – 199).\u00a0Mo\u017enos\u0165 filtr\u00e1cie pod\u013ea transportn\u00e9ho protokolu aj pod\u013ea \u010d\u00edsel portov.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
            \n
            ip access-list extended <meno><\/span><\/pre>\n<\/td>\n
            		Vytv\u00e1ra pojmenovac\u00fd ACL.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>Statick\u00e9 smerovanie<\/span><\/span><\/h3>\n
            Nastavovanie statick\u00fdch routovac\u00edch z\u00e1znamov.<\/span><\/p>\n\n\n\n\n\n\n
            \n
            ip route <cie\u013eov\u00e1 sie\u0165> <maska> <odch\u00e1dzaj\u00face rozhranie><\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de prid\u00e1 statick\u00fd smerovacie z\u00e1znam.<\/span><\/td>\n<\/tr>\n
            \n
            ip route 0.0.0.0 0.0.0.0 <odch\u00e1dzaj\u00face rozhranie><\/span><\/pre>\n<\/td>\n
            		Predvolen\u00e1 br\u00e1na pre nepriamo pripojenej siete.<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed smerovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            ip default-network <adresa siete><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed defaultn\u00fd cestu.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>RIP smerovanie\u00a0<\/span><\/span><\/h3>\n
            Nastavovanie routovac\u00edcho protokolu RIP (Routing Information Protocol).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            ip route <cie\u013eov\u00e1 sie\u0165> <maska> <odch\u00e1dzaj\u00face rozhranie><\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de prid\u00e1 statick\u00fd smerovacie z\u00e1znam.<\/span><\/td>\n<\/tr>\n
            \n
            ip route 0.0.0.0 0.0.0.0 <odch\u00e1dzaj\u00face rozhranie><\/span><\/pre>\n<\/td>\n
            		Predvolen\u00e1 br\u00e1na pre nepriamo pripojenej siete.<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed smerovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            ip default-network <adresa siete><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed defaultn\u00fd cestu.<\/span><\/td>\n<\/tr>\n
            \n
            router rip<\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigur\u00e1cie protokolu RIP (z konfigura\u010dn\u00e9ho m\u00f3du).<\/span><\/td>\n<\/tr>\n
            \n
            network <sie\u0165><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 sie\u0165, s ktorou m\u00e1 protokol RIP pracova\u0165.<\/span><\/td>\n<\/tr>\n
            \n
            no network <sie\u0165><\/span><\/pre>\n<\/td>\n
            		Odoberie sie\u0165.<\/span><\/td>\n<\/tr>\n
            \n
            version <verzia><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed verziu protokolu RIP (1\/2).<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            show ip protocols<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o routovac\u00edm protokolu.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip rip<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n
            \n
            show ip rip database<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed datab\u00e1zu ciest protokolu RIP.<\/span><\/td>\n<\/tr>\n
            \n
            passive-interface <rozhranie><\/span><\/pre>\n<\/td>\n
            		Na danom rozhran\u00ed sa bude iba na\u010d\u00fava\u0165 (nie vysiela\u0165).<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>IGRP smerovanie\u00a0<\/span><\/span><\/h3>\n
            Nastavovanie routovac\u00edcho protokolu IGRP (Interior Gateway Routing Protocol).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n
            \n
            router IGRP ...<\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do re\u017eimu konfigur\u00e1cie protokolu IGRP.\u00a0Parametrom je \u010d\u00edslo auton\u00f3mneho syst\u00e9mu.<\/span><\/td>\n<\/tr>\n
            \n
            network <sie\u0165><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 sie\u0165, s ktorou m\u00e1 IGRP pracova\u0165.<\/span><\/td>\n<\/tr>\n
            \n
            no network <sie\u0165><\/span><\/pre>\n<\/td>\n
            		Odoberie sie\u0165.<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            show ip protocols<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o IGRP (intervaly updatov, …).<\/span><\/td>\n<\/tr>\n
            \n
            no router IGRP ...<\/span><\/pre>\n<\/td>\n
            		Vypne IGRP.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip IGRP ...<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>OSPF smerovanie\u00a0<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia OSPF (OSPF).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            router ospf <\u010d\u00edslo procesu><\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigur\u00e1cie OSPF.<\/span><\/td>\n<\/tr>\n
            \n
            network <adresa> <wildchar maska> area <area ID><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 sie\u0165, area ID pre chrbticovej siete musia by\u0165 rovn\u00e9 0.<\/span><\/td>\n<\/tr>\n
            \n
            area <area ID> authentication message-digest<\/span><\/pre>\n<\/td>\n
            		Zapne autentiz\u00e1ciu medzi routery.<\/span><\/td>\n<\/tr>\n
            \n
            ip ospf priority <priorita><\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhranie – nastav\u00ed prioritu routeru (0 – 255), vy\u0161\u0161ia priorita = v\u00e4\u010d\u0161ia pravdepodobnos\u0165 zvolenia routeru ako DR.<\/span><\/td>\n<\/tr>\n
            \n
            ip ospf cost <\u010d\u00edslo ceny cesty><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed cenu cesty – vy\u0161\u0161ie \u010d\u00edslo = hor\u0161ia cesta.<\/span><\/td>\n<\/tr>\n
            \n
            ip ospf message-digest-key 1 md5 7 <heslo><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed k\u013e\u00fa\u010d (heslo) pre autentiz\u00e1ciu medzi routery.<\/span><\/td>\n<\/tr>\n
            \n
            ip ospf hello-interval <\u010das><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed interval medzi hello pakety.<\/span><\/td>\n<\/tr>\n
            \n
            ip ospf dead-interval <\u010das><\/span><\/pre>\n<\/td>\n
            		Interval, kedy je router pova\u017eovan\u00fd za straten\u00fd (pokia\u013e sa neozve).<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            show ip ospf [...]<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed r\u00f4zne inform\u00e1cie o OSPF.<\/span><\/td>\n<\/tr>\n
            \n
            show ip OSPF database<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed datab\u00e1zu ciest.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip ospf [...]<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy (napr. Events).<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>EIGRP smerovania\u00a0<\/span><\/span><\/h3>\n
            Nastavenie smerovacieho protokolu EIGRP (Enhanced Interior Gateway Routing Protocol).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            router EIGRP <\u010d\u00edslo auton\u00f3mneho syst\u00e9mu><\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de.\u00a0Vst\u00fapi do konfigur\u00e1cie EIGRP.\u00a0\u010c\u00edslo auton\u00f3mneho syst\u00e9mu m\u00f4\u017ee kore\u0161pondova\u0165 s IGRP (EIGRP preposiela cesty IGRP s rovnak\u00fdm \u010d\u00edslom).<\/span><\/td>\n<\/tr>\n
            \n
            network <sie\u0165><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 sie\u0165, s ktorou m\u00e1 EIGRP pracova\u0165.<\/span><\/td>\n<\/tr>\n
            \n
            show ip route<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed routovacie tabu\u013eku.<\/span><\/td>\n<\/tr>\n
            \n
            show ip EIGRP Neighbors<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed susedn\u00e9 routery s EIGRP.<\/span><\/td>\n<\/tr>\n
            \n
            show ip EIGRP topology<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed tabu\u013eku topol\u00f3gie siete.<\/span><\/td>\n<\/tr>\n
            \n
            debug EIGRP ...<\/span><\/pre>\n<\/td>\n
            		Zapne r\u00f4zne ladiace v\u00fdpisy (napr. Packet).<\/span><\/td>\n<\/tr>\n
            \n
            auto-summary<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii routovanie.\u00a0Zapne autosumarizaci (zhlukovaniu z\u00e1znamov s r\u00f4znymi maskami podsiet\u00ed).<\/span><\/td>\n<\/tr>\n
            \n
            ip summary-address EIGRP <auton\u00f3mnej \u010d\u00edslo> <sie\u0165> <maska><\/span><\/pre>\n<\/td>\n
            		Autosumarizace na rozhran\u00ed.<\/span><\/td>\n<\/tr>\n
            \n
            ip authentication mode EIGRP <\u010d\u00edslo \u00e1ut.\u00a0syst\u00e9mu> md5<\/span><\/pre>\n
            ip authentication key-chain EIGRP <\u00e1ut.\u00a0\u010d.> <n\u00e1zov k\u013e\u00fa\u010da><\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhrania.\u00a0Zapne autentiz\u00e1ciu MD5 k\u013e\u00fa\u010dom.<\/span><\/td>\n<\/tr>\n
            \n
            key chain <n\u00e1zov k\u013e\u00fa\u010da><\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de.\u00a0Vst\u00fapi do konfigur\u00e1cie k\u013e\u00fa\u010da.<\/span><\/td>\n<\/tr>\n
            \n
            key <\u010d\u00edslo k\u013e\u00fa\u010da><\/span><\/pre>\n
            key-string <text><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed k\u013e\u00fa\u010d.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>NAT \/ PAT\u00a0<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia prekladu adries NAT \/ PAT (Network Address Translation \/ Port Address Translation).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n
            \n
            ip nat inside source static <vn\u00fatorn\u00e9 IP> <vonkaj\u0161ie ip><\/span><\/pre>\n<\/td>\n
            		Vykon\u00e1 pevn\u00fa (statick\u00fa) konfigur\u00e1ciu NAT (vn\u00fatorn\u00e9 IP <=> vonkaj\u0161iu IP).\u00a0V konfigura\u010dnom re\u017eime.<\/span><\/td>\n<\/tr>\n
            \n
            ip nat inside<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhrania.\u00a0Identifikuje rozhranie na vn\u00fatornej sieti.<\/span><\/td>\n<\/tr>\n
            \n
            ip nat outside<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhrania.\u00a0Identifikuje rozhranie na vonkaj\u0161ej sieti.<\/span><\/td>\n<\/tr>\n
            \n
            ip nat pool <meno> <od IP> <do IP> Netmask <maska \u200b\u200bsiete><\/span><\/pre>\n<\/td>\n
            		Vytvor\u00ed pomenovan\u00fd rozsah IP adries pre dynamick\u00fd NAT.<\/span><\/td>\n<\/tr>\n
            \n
            ip nat inside source list <\u010d\u00edslo ACL> pool <meno><\/span><\/pre>\n<\/td>\n
            		Definuje dynamick\u00fd nat s dan\u00fdm ACL a dan\u00fdm rozsahom adries.\u00a0ACL by mel povo\u013eova\u0165 vn\u00fatorn\u00fd rozsah (permit).<\/span><\/td>\n<\/tr>\n
            \n
            ip nat inside source list <\u010d\u00edslo ACL> interface <rozhranie> overload<\/span><\/pre>\n<\/td>\n
            		Definuje PAT (vyu\u017e\u00edva \u010d\u00edsla portov k adresovanie po\u010d\u00edta\u010dov vo vn\u00fatornej sieti).<\/span><\/td>\n<\/tr>\n
            \n
            clear ip nat translation *<\/span><\/pre>\n<\/td>\n
            		Zma\u017ee v\u0161etky dynamick\u00e9 z\u00e1znamy.<\/span><\/td>\n<\/tr>\n
            \n
            show ip nat translation<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed akt\u00edvny preklady.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            DHCP<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia DHCP (Dynamic Host Configuration Protocol).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n
            \n
            ip dhcp pool <meno><\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigur\u00e1cie DHCP.<\/span><\/td>\n<\/tr>\n
            \n
            network <adresa> <maska><\/span><\/pre>\n<\/td>\n
            		\u0160pecifikuje rozsah pride\u013eovan\u00fdch adries.<\/span><\/td>\n<\/tr>\n
            \n
            default-router<\/span><\/pre>\n<\/td>\n
            		\u0160pecifikuje pride\u013eovanej predvolen\u00fa br\u00e1nu.<\/span><\/td>\n<\/tr>\n
            \n
            dns-server<\/span><\/pre>\n<\/td>\n
            		Pride\u013eovan\u00fd DNS server.<\/span><\/td>\n<\/tr>\n
            \n
            ip dhcp excluded-address <od IP> <do IP><\/span><\/pre>\n<\/td>\n
            		Adresy, ktor\u00e9 nebud\u00fa pride\u013eovan\u00e9.\u00a0V konfigura\u010dnom m\u00f3de.<\/span><\/td>\n<\/tr>\n
            \n
            show ip dhcp binding<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed tabu\u013eku prepo\u017ei\u010dan\u00fdch adries.<\/span><\/td>\n<\/tr>\n
            \n
            debug ip DHCP server events<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n
            \n
            ip helper-address <adresa><\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhrania.\u00a0Vytvor\u00ed DHCP relay.\u00a0Router sa bude tv\u00e1ri\u0165 ako DHCP a bude komunikova\u0165 so skuto\u010dn\u00fdm DHCP serverom.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            PPP\u00a0<\/span><\/span><\/h3>\n
            Nastavenie protokolu PPP (Point-to-Point Protocol).<\/span><\/p>\n\n\n\n\n\n\n\n\n
            \n
            Encapsulation ppp<\/span><\/pre>\n<\/td>\n
            		Pri konfigur\u00e1cii rozhrania.\u00a0Zapne PPP.<\/span><\/td>\n<\/tr>\n
            \n
            ppp authentization [PAP | CHAP]<\/span><\/pre>\n<\/td>\n
            		Zapne algoritmus autentiz\u00e1cie.<\/span><\/td>\n<\/tr>\n
            \n
            ppp pap sent-username <meno> password <heslo><\/span><\/pre>\n<\/td>\n
            		Meno, ktor\u00fdm sa identifikuje rozhranie.<\/span><\/td>\n<\/tr>\n
            \n
            username <meno> password <heslo><\/span><\/pre>\n<\/td>\n
            		V konfigura\u010dnom m\u00f3de.\u00a0Prid\u00e1 vzdialen\u00e9ho u\u017e\u00edvate\u013ea.<\/span><\/td>\n<\/tr>\n
            \n
            compress [Predictor | stac]<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed algoritmus kompresie.<\/span><\/td>\n<\/tr>\n
            \n
            debug ppp authentication<\/span><\/pre>\n<\/td>\n
            		Zapne ladiace v\u00fdpisy autentiz\u00e1cie PPP.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            ISDN\u00a0<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia ISDN (Integrated Services Digital network).<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            isdn switch-type <typ switche><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed typ ISDN switche, s ktor\u00fdm router komunikuje.\u00a0Napr.\u00a0basic-ni.<\/span><\/td>\n<\/tr>\n
            \n
            isdn spid {1 | 2} <SPID \u010d\u00edslo> [<lok\u00e1lne \u010d\u00edslo>]<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed priraden\u00e9 SPID \u010d\u00edslo.\u00a0V konfigur\u00e1cii rozhran\u00ed BRI.<\/span><\/td>\n<\/tr>\n
            \n
            controller <controller> <slot> \/ <port><\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do menu controller.<\/span><\/td>\n<\/tr>\n
            \n
            pri-group timeslots <rozsah><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed port ako PRI.<\/span><\/td>\n<\/tr>\n
            \n
            show isdn status<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed inform\u00e1cie o ISDN spojenie.<\/span><\/td>\n<\/tr>\n
            \n
            show interface bri0 \/ 0<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed \u0161tatistiky pre konkr\u00e9tnu rozhranie routera.<\/span><\/td>\n<\/tr>\n
            \n
            show isdn active<\/span><\/pre>\n<\/td>\n
            		Zobrazi prebiehaj\u00face spojenie.<\/span><\/td>\n<\/tr>\n
            \n
            debug isdn ...<\/span><\/pre>\n<\/td>\n
            		Ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n
            \n
            dialer-list <\u010d\u00edslo> protocol op permit<\/span><\/pre>\n<\/td>\n
            		Vytvor\u00ed vyt\u00e1\u010dacou zoznam.<\/span><\/td>\n<\/tr>\n
            \n
            dialer-group <\u010d\u00edslo><\/span><\/pre>\n<\/td>\n
            		Prirad\u00ed rozhranie do vyt\u00e1\u010dacieho zoznamu.\u00a0V konfigur\u00e1cii rozhran\u00ed BRI.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            Frame-Relay<\/span><\/span><\/h3>\n
            Nastavovanie Frame relay.<\/span><\/p>\n\n\n\n\n\n\n\n\n
            \n
            Encapsulation frame-relay [IETF]<\/span><\/pre>\n<\/td>\n
            		Zapne na danom rozhran\u00ed frame-relay.\u00a0V konfigur\u00e1cii rozhrania.<\/span><\/td>\n<\/tr>\n
            \n
            bandwidth <\u010d\u00edslo><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed \u0161\u00edrku prenosu.\u00a0napr. 64.<\/span><\/td>\n<\/tr>\n
            \n
            frame-relay LMI-type ansi<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed sa len na jednej strane linky.<\/span><\/td>\n<\/tr>\n
            \n
            frame-relay m\u00e1p ip <adresa druhej strany> <\u010d\u00edslo> broadcast [IETF]<\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed routera adresu druhej strany spoja.<\/span><\/td>\n<\/tr>\n
            \n
            show frame-relay m\u00e1p<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed tabu\u013eku frame-relay routerov.<\/span><\/td>\n<\/tr>\n
            \n
            debug frame-relay ...<\/span><\/pre>\n<\/td>\n
            		Ladiace v\u00fdpisy.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            Konfigur\u00e1cia switche<\/span><\/span><\/h2>\n
            Pr\u00edkazy iba pre prep\u00edna\u010de (nie smerova\u010da).<\/span><\/p>\n
            <\/span>Layer 3 pr\u00edstup\u00a0<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia L3 pr\u00edstupu k prep\u00edna\u010du.<\/span><\/p>\n
            Switch (config) #interface VLAN 1<\/span>\r\nSwitch (config-if) #ip address 192.168.1.2 255.255.255.0<\/span>\r\nSwitch (config-if) #exit<\/span>\r\nSwitch (config) #ip default-gateway 192.168.1.1<\/span>\r\nSwitch # show Interac VLAN 1<\/span>\r\n<\/pre>\n
            Nastav\u00ed IP adresu na VLAN switche.<\/span><\/p>\n
            STP\u00a0<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia STP (Spanning Tree Protocol).<\/span><\/p>\n\n\n\n\n
            \n
            show spanning-tree brief<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed spr\u00e1vu o STP.<\/span><\/td>\n<\/tr>\n
            \n
            spanning-tree vlan 1 priority <priorita><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed prioritu STP na vlan 1.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            <\/span>Spr\u00e1va tabu\u013eky MAC adries<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia tabu\u013eky MAC adries.<\/span><\/p>\n\n\n\n\n\n\n\n
            \n
            show mac-address-table<\/span><\/pre>\n<\/td>\n
            		Zobrazenie tabu\u013eky.<\/span><\/td>\n<\/tr>\n
            \n
            show mac-address-table static<\/span><\/pre>\n<\/td>\n
            		Zobrazenie statick\u00fdch z\u00e1znamov.<\/span><\/td>\n<\/tr>\n
            \n
            clear mac-address-table dynamic<\/span><\/pre>\n<\/td>\n
            		Vymazanie dynamick\u00fdch z\u00e1znamu.<\/span><\/td>\n<\/tr>\n
            \n
            mac-address-table static <MAC adresa> interface <rozhranie> ...<\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 statick\u00fd z\u00e1znam o MAC adrese do tabu\u013eky MAC adries.\u00a0Mo\u017eno \u0161pecifikova\u0165 VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            switchport port-security ...<\/span><\/pre>\n<\/td>\n
            		Na danom rozhran\u00ed nastav\u00ed zabezpe\u010denia (napr. Len pre dan\u00fa staticky nastaven\u00fa MAC adresu).<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            VLAN<\/span><\/span><\/h3>\n
            Konfigur\u00e1cia VLAN.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
            \n
            show vlan<\/span><\/pre>\n<\/td>\n
            		Zobraz\u00ed tabu\u013eku VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            vlan database<\/span><\/pre>\n<\/td>\n
            		Vst\u00fapi do konfigur\u00e1cie VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            vlan <\u010d\u00edslo> name <meno><\/span><\/pre>\n<\/td>\n
            		Prid\u00e1 VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            no vlan <\u010d\u00edslo><\/span><\/pre>\n<\/td>\n
            		Odoberie VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            delete flash: vlan.dat<\/span><\/pre>\n<\/td>\n
            		Zma\u017ee datab\u00e1zu VLAN v pam\u00e4ti FLASH.<\/span><\/td>\n<\/tr>\n
            \n
            switchport mode {access | trunk}<\/span><\/pre>\n<\/td>\n
            		V konfigur\u00e1cii rozhrania.\u00a0Nastav\u00ed m\u00f3d prenosu cez spoj.<\/span><\/td>\n<\/tr>\n
            \n
            switchport access vlan <\u010d\u00edslo><\/span><\/pre>\n<\/td>\n
            		Prirad\u00ed rozhranie do VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            no switchport access vlan <\u010d\u00edslo><\/span><\/pre>\n<\/td>\n
            		Odoberie rozhranie z VLAN.<\/span><\/td>\n<\/tr>\n
            \n
            switchport trunk Encapsulation <typ><\/span><\/pre>\n<\/td>\n
            		Nastav\u00ed oba\u013eovanie paketov v re\u017eime trunk na <typ>.<\/span><\/td>\n<\/tr>\n
            \n
            interface <rozhranie> <slot> \/ <port>. <subport><\/span><\/pre>\n<\/td>\n
            		Konfigur\u00e1cia subrozhran\u00ed na danom rozhran\u00ed (pre routovanie medzi VLAN).<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
             <\/p>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
            Cisco IOS (p\u00f4vodne Internetwork Operating System) je opera\u010dn\u00fd syst\u00e9m pou\u017e\u00edvan\u00fd na smerova\u010doch a prep\u00edna\u010doch firmy Cisco Systems. obsah 1 Preh\u013ead m\u00f3dov 1.1 Kl\u00e1vesov\u00e9 skratky 1.2…<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":102,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"_links":{"self":[{"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/pages\/418"}],"collection":[{"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/comments?post=418"}],"version-history":[{"count":2,"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/pages\/418\/revisions"}],"predecessor-version":[{"id":421,"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/pages\/418\/revisions\/421"}],"up":[{"embeddable":true,"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/pages\/102"}],"wp:attachment":[{"href":"http:\/\/tech.sosthe.sk\/index.php\/wp-json\/wp\/v2\/media?parent=418"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}